Protective Hard Case NC-300

NC-300 Protective Hard Case

NC-300 protective hard case delivers medium-format equipment protection through expanded interior width, increased storage capacity, impact-resistant construction, configurable foam organization. Interior dimensions measure 313 × 242 × 130 mm; exterior dimensions measure 345 × 302 × 150 mm. Nominal internal volume reaches 9.85 L, while empty shell weight totals 1.72 kg. Wider interior geometry supports camera kits, folded drones, technical instruments, optical equipment, compatible dual-handgun configurations.

Verified Product Specifications

Published interior measurements represent gross shell dimensions. Protective foam, compartment spacing, equipment geometry, lid cushioning determine actual usable capacity. Empty shell weight excludes custom inserts, devices, additional accessories.

Wider Equipment Layout

NC-300 protective hard case provides 313 mm internal length plus 242 mm internal width, creating generous horizontal equipment placement across medium-format protective storage. Broader shell geometry supports separated devices, organized accessories, controlled foam compartment layouts.

Compared against NC-210, interior length increases by 70 mm; interior width increases by 54 mm. Internal floor area expands approximately 66 percent, enabling more flexible side-by-side component arrangements.

Total interior depth measures 130 mm. Taller equipment requiring greater vertical clearance demands individual model evaluation, while wider payload arrangements benefit from expanded NC-300 floor dimensions.

Medium Format Capacity

Nominal 9.85 L internal volume supports professional equipment kits involving multiple coordinated components. Wider interior proportions improve accessory separation across cameras, inspection devices, compact drones, electronic instruments.

Vertical space combines 100 mm base depth plus 30 mm lid depth. Equipment housings, protective foam, protruding connectors, optical attachments reduce practical available clearance.

Precise interior planning requires complete component measurement, suitable cushioning allowances, safe positioning throughout transport.

Camera Equipment Organization

Compact camera bodies, appropriately sized lenses, removable batteries, chargers, memory cards benefit from wider protective equipment layouts. Dedicated foam cavities help isolate optical surfaces while organizing essential imaging accessories.

Expanded floor dimensions support selected mirrorless camera kits, action-camera systems, inspection cameras, professional documentation equipment. Careful component placement helps maintain orderly access throughout travel, field assignments, technical imaging operations.

Large telephoto lenses, oversized cinema rigs, extended lighting equipment require alternative case dimensions.

Drone Equipment Protection

Selected folded drones, compatible controllers, spare batteries, charging accessories benefit from wider interior planning. NC-300 supports separated foam compartments whenever aircraft dimensions, controller geometry, accessory count remain compatible.

Folded aircraft length, battery placement, propeller protection, component height determine suitable configuration. Expanded horizontal space supports organized accessory positioning without forcing unsupported component stacking.

Larger drones, unfolded aircraft, oversized controllers exceed practical medium-case capacity. Battery handling follows equipment-specific manufacturer instructions, applicable transport requirements.

Technical Instrument Storage

Handheld measurement devices, electronic testing instruments, thermal imaging equipment, calibration tools require dependable protection throughout professional field operations. Wider internal dimensions support organized kits involving primary instruments, probes, adapters, cables, removable accessories.

Precision foam cavities help maintain separation around screens, connectors, control switches, sensitive housings. Expanded floor area improves layout flexibility across industrial maintenance, electrical inspection, technical diagnostics.

Equipment compatibility depends upon individual device measurements, suitable protective spacing, selected foam configuration.

Optical Device Protection

Compact binoculars, inspection optics, thermal cameras, imaging accessories require controlled positioning during transport. NC-300 provides wider storage geometry supporting compatible optical devices alongside separated accessory compartments.

Custom interior cavities help reduce contact involving lenses, eyepieces, adjustment controls, removable components. Appropriate foam density supports stable equipment placement throughout routine handling.

Large optical assemblies, oversized spotting scopes, extended mounting systems require larger protective case dimensions.

Dual Handgun Compatibility

Selected custom foam configurations accommodate two appropriately sized handguns alongside compatible magazines, optics, shooting accessories. Wider 313 × 242 mm interior floor dimensions support controlled equipment separation whenever actual firearm measurements permit.

Dual-handgun suitability depends upon overall equipment length, grip geometry, optic height, magazine placement, protective foam spacing. Oversized firearms, mounted accessories, larger tactical components change practical interior requirements.

Responsible firearm transport follows local regulations, safe handling practices, verified storage procedures. Individual equipment fit requires careful dimensional assessment.

Medical Accessory Protection

Portable diagnostic devices, medical-equipment accessories, laboratory instruments, monitoring components require dimensionally appropriate protective organization. Wider NC-300 interior space supports selected accessory kits involving cables, adapters, sensors, compact electronic modules.

Precision foam layouts help separate sensitive screens, connectors, removable diagnostic components throughout handling. Suitable packaging requires equipment-specific measurement, cleanliness procedures, appropriate operational protocols.

Protective case construction does not establish medical certification, sterile storage suitability, regulated-device approval.

Custom Foam Engineering

Precision-cut EVA inserts transform 9.85 L nominal shell capacity into organized professional equipment storage. Individual compartments accommodate cameras, optical devices, drone components, inspection tools, compatible firearm accessories.

Wider internal footprint supports side-by-side equipment positioning, separated accessory cavities, improved component accessibility. Custom foam density, cavity depth, protective spacing influence final configuration suitability.

Interior engineering requires exact equipment dimensions, realistic handling expectations, sufficient cushioning clearance.

Impact Resistant Construction

Impact-resistant exterior construction helps protect enclosed devices during routine transport, mobile deployment, repeated professional handling. Rigid shell geometry separates sensitive contents from surrounding physical contact.

Protective foam complements exterior shell performance through controlled component positioning, reduced internal movement, suitable equipment spacing. Actual protection depends upon payload characteristics, selected interior design, real handling conditions.

Medium-format exterior proportions support practical storage inside service vehicles, equipment cabinets, professional workspaces.

Water Resistant Performance

Water-resistant construction supports professional equipment handling across variable weather, outdoor assignments, moisture-prone working environments. Proper shell closure helps reduce exposure involving incidental splashes, routine surface moisture, changing field conditions.

Reliable performance depends upon correct closure, maintained shell condition, suitable handling procedures. Water resistance does not establish underwater capability, defined ingress-protection classification, pressure tolerance.

Moisture-sensitive optics, cameras, medical accessories, electronic instruments require packaging procedures matching expected environmental exposure.

Temperature Operating Range

NC-300 shell operating temperature spans −30°C through +65°C. Equivalent Fahrenheit values reach −22°F through +149°F.

Temperature tolerance supports transport across varied seasonal conditions, outdoor assignments, mobile technical operations. Shell operating limits remain separate from protected device specifications.

Batteries, optical components, imaging sensors, diagnostic electronics retain individual manufacturer-defined temperature requirements. Suitable storage depends upon actual equipment specifications, exposure duration, surrounding conditions.

Professional Color Options

NC-300 protective hard case supports six exterior colors: Black, Desert Beige, Desert Beige/Black, Khaki Green, Yellow, Orange.

Distinct finishes support department-specific equipment organization, operational visibility, professional brand presentation, coordinated commercial packaging. Bright colors improve recognition throughout active work environments; neutral options complement technical equipment programs.

Color availability depends upon production schedules, order quantities, current inventory conditions.

OEM Production Programs

Equipment manufacturers, commercial distributors, professional service organizations require consistent protective packaging across coordinated production programs. NC-300 supports OEM applications involving imaging equipment, diagnostic devices, technical instruments, optical components, compatible firearm accessories.

Manufacturer-driven production enables repeatable shell dimensions, coordinated foam planning, consistent commercial presentation. Wider equipment layouts improve configuration flexibility across demonstration packages, service kits, professional product bundles.

Project suitability depends upon device geometry, requested foam configuration, production volume, exterior color requirements.

Medium Protection Summary

NC-300 protective hard case combines 313 × 242 × 130 mm interior dimensions, 9.85 L nominal capacity, 100 mm base depth, impact-resistant construction. Medium protective hard case dimensions span 345 × 302 × 150 mm externally, supporting broader equipment organization across diverse professional applications.

Custom foam layouts, six exterior colors, 1.72 kg empty weight deliver practical packaging flexibility across imaging, optical, technical, diagnostic, drone-related equipment.

Contact NeithCase regarding product specifications, compatible foam configurations, exterior colors, OEM production requirements.